
If you’ve grown weary of staring at your wall and you’re thinking to yourself “What a drab,” the best way to give your home a new lease on life is through a fresh coat of paint. In Sarasota, interior painting services show techniques that will give that paint job a professional appearance. In this blog, we’ll go over those interior painting methods.
1. Preparation is Essential
To prevent paint splatters, start by moving the furniture out of the room and covering the floors with drop cloths. Take out any obstructions from the walls, such as wall decorations, screws, and nails. Once the space is clear, look for flaws in the walls (holes, cracks, and uneven surfaces) and use spackling paste to fill in those flaws.
2. Clean and Prime
The walls will have to be completely painted. Get rid of any debris, or dust that could compromise the paint’s bond with the surface. Wash the walls with a sponge and a mild detergent solution, rinse with fresh water, and let them air dry. After that, the wall will need priming. Primer creates a uniform surface.
3. Choose the Right Tools
Buy top-notch painting supplies. They produce results that look professional. Select rollers and brushes based on the kind of paint to be used and the surface that will be painted. There must be painter’s tape to shield any areas that shouldn’t be painted. It will aid in drawing precise, clean lines.
4. Cutting In
The term “cutting in” refers to painting the nooks and crannies that rollers cannot reach. This means beginning the painting project with a border. Use painter’s tape on the area and brush paint into the edges of walls, around switches, and sockets. After that, ‘cut in’ like a pro. Sarasota residential painting follows this process of using a paintbrush before applying paint with rollers.
5. Use Proper Rolling Technique
Roll the paint in an even layer across the wall using a W-shaped motion. Begin with a zigzag pattern and roll vertically from ceiling to floor to fill in any spaces. Avoid packing the roller with too much paint. This can cause dripping and uneven application. Keep a wet edge and prevent obvious lap marks to achieve a great finish.
6. Finishing Touches
After the last coat of paint has dried, rehang any wall decorations and replace outlet covers and switch plates. If any touch-ups need to be done, they should be taken care of for a perfect finish. If more coats may be needed, make sure the previous one is completely dry before adding the next one.
Dull to Dazzling Made Easy
Sarasota interior painting services can be expected to achieve professional-looking results with the use of the techniques just mentioned. Remember that it takes more than adding the hue of your choice to walls. Having your colorful vision translated with the proficiency that only a skilled contractor can do is what it’s all about.
Don’t think twice about employing our experience in painting and refinishing that dates back to 25 years ago. Call us at JC Painting and Refinishing. We take on residences and commercial establishments at affordable rates. Call 941-893-0891.